FITTING GUIDE

a

Ready to start cloth diapering?

Resize diaper, attach inserts and fit it on your baby!

Logo

Resize your diaper

Note: Remember to resize your diaper before attaching the inserts!

1

USE RISE SNAPS

The rise snaps are the buttons on the front of the diaper. We have 3 x 4 levels of these.

2

FIND THE CORRECT RISE SETTING

Based on your baby's weight and size, determine which rise setting you need to use (check out the table for reference). There should be no gap between the thigh and elastics of the diaper upon wearing.

3

ADJUST THE SIZE

Snap one of the bottom levels to the top most row. Using the bottom most level and snapping up achieves the smallest fit.

Don't have a machine?

Check out our hand wash routine! It's just as easy.

Size Chart

When do I attach the inserts?

After you're done adjusting the size of the diaper, it's time to fix the inserts in place!

Logo

Attaching your inserts

Note: Our ULTIMATE diapers come with detached inserts that you can place inside or outside the pocket.

1

PICK YOUR INSERTS

Depending on whether it's daytime or nighttime, and your baby's wetting pattern - pick the insert/s you would like to use (Trunk, Basic & Mini Booster). If you are using the Mini Booster, you can attach it to the back of the Trunk or Basic Insert.

2

ATTACH THE INSERTS

You can either lay all your inserts outside the pocket and secure with the snaps or stuff them all into the pocket or find a combination that works for you! Lay the wider side of the Trunk Insert towards the front or back depending on your baby’s wetting pattern.

3

FOLD EXCESS

Fold the Inserts if needed to ensure it is lying within the length of the shell. Fold out any creases and your diaper is ready to be worn!

Fitting your diaper

Note: Be sure to do the fit check to avoid leaks!

1

PUT THE DIAPER ON

Place your baby's bottom on the open diaper and snap on the waist buttons. The waistband of the diaper should lie below the belly button and the leg elastics should be stretched up enough to avoid bunching near leg creases.

2

TUCK IN THE ELASTICS

Run your finger from the back of the elastics all the way to the front and tuck in excess fabric upwards. Ensure that the elastics are lying on the leg crease with no gaps and not the thigh!

3

CHECK THE FIT

Ensure a 2 finger gap at the front and back waistband. Finally, be sure to send us a picture!

Have more questions?

The diaper is causing elastic marks on my baby! Is this okay?

Elastic marks that fade away in 10-15 minutes are normal and similar to sock marks. They will not cause any discomfort to the baby! If the marks aren't fading after 15 mins, the diaper fit needs a tweak! Reach out to us or book a video demo and we will be happy to guide you!

The diaper fit looks bulky; is this normal?

When sized correctly, our diapers are quite trim and will not affect your baby's growth! Please reach out to us with fit pictures and we'll help you adjust the fit!

Can I use rash creams and lotions on my baby before using the diaper?

Our diapers are made from hypoallergenic and natural fabrics and do not cause rashes! If you do need to use a recommended cream, please use an easy clean liner on top of the inserts! You can alternatively also use coconut oil to keep your baby's skin moisturized!

Should I fit the diaper a little loose on my baby?

Our diapers are made from breathable materials and are pillowy soft on your baby's skin; you need not worry about the diaper being too tight! A loose fitted diaper can cause friction and leaks and is not recommended. Please reach out to us if you would like help perfecting the fit!

Reach out to us

Please feel free to reach out to us with any questions, suggestions, feedback and definitely with pictures of your baby! We will be happy to assist you to the best of our abilities. You can call/whatsapp us at +91 8897460027. Alternatively, click on the chat button at the bottom right or ping us on any of our social media accounts. We look forward to hearing from you!

Logo